This minHour teaches you how to move files from one Mac computer onto another Mac computer.
Using AirDrop
Turn on Wi-Fi and Bluetooth for both Macs.
In order to use AirDrop, both Wi-Fi and Bluetooth must be enabled on both of your Macs:
- Wi-Fi — Click the “Wi-Fi” icon in your Mac’s menu bar, then click Turn Wi-Fi On in the drop-down menu. You’ll also need to select and sign into a Wi-Fi network if your Mac doesn’t automatically connect to one.
- Bluetooth — Open the Apple menu, click System Preferences…, click Bluetooth, and click Turn Bluetooth On on the left side of the window.
Make sure your Macs are on and within 30 feet (9 meters) of each other.
Since AirDrop won’t work reliably past around 30 feet, you’ll need to make sure that your Macs are near each other (preferably in the same room).
- Appliances, walls, and floors can all prevent AirDrop from working within the 30-foot range.
- Both Macs need to be turned on in order to complete the file transfer.
Open Finder.
Click the Finder app icon, which resembles a blue face, in your Mac’s Dock.
Turn on AirDrop if necessary.
If AirDrop is disabled on either of your Macs, you can enable it by clicking at the top of the screen, clicking in the resulting drop-down menu, clicking the link at the bottom of the window that appears, and clicking in the drop-down menu. You can then close the AirDrop window.
Select files to send.
Go to the location of the files you want to transfer, then hold down ⌘ Command while clicking each file you want to transfer.
Hold down Control while clicking a selected file.
Doing so will prompt a drop-down menu.
Select Share.
It’s in the drop-down menu. Selecting it prompts a pop-out menu to appear.
Click AirDrop.
This option is in the pop-out menu. Doing so opens the AirDrop window.
Select your other Mac’s username.
Click the name of the account you use for your other Mac. This will send a file transfer request to the other Mac.
Accept the transfer on your other Mac.
When prompted, click in the AirDrop notification on the other Mac. The AirDrop files should begin downloading into your Mac’s Downloads folder.
Click Done on the first Mac.
Doing this will close the AirDrop menu.
Using an External Hard Drive
Plug a flash drive or external hard drive into a Mac.
Using the drive’s USB cable or connector, attach the drive to one of your Mac’s USB ports.
- If you have a newer MacBook, you may not have a traditional rectangular USB port. If so, you’ll need a USB to Thunderbolt 3 adapter.
- If this is your first time plugging in the hard drive, you may need to format it. If so, make sure you choose Mac OS Extended (Journaled) as the format.
Open Finder.
Click the Finder app icon, which resembles a blue face, in your Mac’s Dock.
Go to the files you want to transfer.
Open the folder in which the files you want to transfer are located.
Select the files.
Hold down ⌘ Command while clicking each file you want to copy.
- If you want to copy the entire folder’s contents, click one file, then press .
Copy the files.
Press ⌘ Command+C to do so.
Click your external drive’s name.
It’s in the lower-left side of the Finder window. Doing so opens your external drive.
Paste in the copied files.
Press ⌘ Command+V to do so. Your files will appear in the external drive’s window.
Eject and remove the drive
Click the “Eject” icon to the right of the drive’s name, then unplug the drive.
Plug the drive into your other Mac.
This should be the Mac onto which you want to transfer your files.
Open Finder, then click your external drive’s name.
It’s in the lower-left side of the Finder window. You should see the files you copied onto the drive here.
Move the files onto your Mac.
Click and drag the files from the drive onto your desktop (or into your preferred folder). This will place the files on your Mac.
Using a Thunderbolt 3 Bridge
Make sure both of your Macs support Thunderbolt 3.
Thunderbolt 3 (also known as USB-C) ports resemble oval slots; you’ll find them on the sides of your MacBook housing or on the back of your iMac monitor.
- If your Macs don’t both use Thunderbolt 3, you can’t use this method.
Buy a Thunderbolt 3 cable.
Thunderbolt 3 cables have a USB-C connector at each end of the cable. You can find these cables online or in tech department stores.
Connect the two Macs with the cable.
Plug one end of the cable into one Mac’s Thunderbolt 3 port, then plug the other end into your other Mac’s Thunderbolt 3 port.
Open the Apple menu.
Click the Apple logo in the top-left corner of the screen. A drop-down menu will appear.
- Make sure you’re doing this on Mac from which you want to send files.
Click System Preferences….
It’s in the drop-down menu.
Click Network.
This option is a globe-shaped icon in the System Preferences window.
Click ＋.
It’s at the bottom of the left-hand column of connections. A pop-up window will appear.
Click the “Interface” drop-down box.
You’ll find this near the top of the pop-up window. Clicking it prompts a drop-down menu.
Click Thunderbolt Bridge.
It’s in the drop-down menu.
Click Create.
This is at the bottom of the pop-up window.
Click Apply.
It’s in the bottom-right corner of the screen.
Add the Thunderbolt Bridge on the other Mac.
You’ll do this using the same process as above:
- Open System Preferences, then click Network.
- Click ＋, then select Thunderbolt Bridge in the “Interface” drop-down menu.
- Click Create, then click Apply.
Wait for both Macs to recognize the Thunderbolt Bridge connection.
Once the colored dot to the left of the “Thunderbolt Bridge” heading turns from red to yellow, you can proceed.
- If it takes more than a couple of minutes for your Mac’s Thunderbolt Bridge connection to switch, close and re-open the Network window.
Note the IP address on the target computer.
The address to the right of the “IP Address” heading is the address you’ll use to connect to the current computer.
Enable file sharing for the first Mac.
Make sure you’re doing this on the Mac to which you want to transfer files:
- Click the ⋮⋮⋮⋮ icon in the top-left corner of System Preferences.
- Click Sharing.
- Check the “File Sharing” box on the left side of the window.
Connect to the Mac.
On the Mac on which you did not enable File Sharing, do the following:
- Open Finder or click the desktop.
- Click Go at the top of the screen.
- Click Connect to Server… in the drop-down menu.
- Enter your other Mac’s IP address that you noted.
- Click Connect.
Sign in.
Enter the username and password you use to log into the Mac to which you’re connecting, then click .
Click Macintosh HD.
You’ll see this option in the pop-up window that appears. Doing so selects your other Mac’s hard drive as the target location.
- If you have a solid state drive (SSD), you’ll click the SSD option here instead.
Click OK.
It’s at the bottom of the pop-up window.
Transfer files to the other Mac.
You can copy files from anywhere on your computer and then add them to your other Mac by doing the following:
- Click the IP address (or Mac name) in the left-hand column of Finder.
- Go to the folder in which you want to paste the files (e.g., Desktop) in the Finder window.
- Press .
- Wait for the files to appear on the other Mac.
Using a Time Machine Backup
Understand when to use this method.
If you want to migrate your Mac’s preferences, files, and other information onto a new Mac, you can use a Time Machine backup from your old Mac to do so.
- This method shouldn’t be used for regular file transfers.
Create a Time Machine backup
If you don’t already have a Time Machine backup, create one using a blank hard drive before proceeding.
Attach your Time Machine hard drive to a Mac.
Plug your Time Machine drive into the Mac that you want to set up using the Time Machine backup.
- If you have a newer MacBook, you may not have a traditional rectangular USB port. If so, you’ll need a USB to Thunderbolt 3 adapter.
Restart your Mac.
Click the Apple menu, click , and click when prompted. Your Mac will begin to restart.
Press and hold ⌘ Command and R.
You’ll need to do this as your Mac is restarting.
Release the keys when you see the Utilities window appear.
This window will have a few options (e.g., ) in it.
Click Restore from Time Machine Backup.
It’s in the middle of the window.
Click Continue twice.
It’s in the bottom-right corner of the window.
Click Time Machine Backup.
This option is in the middle of the window.
Click Continue.
It’s in the bottom-right corner.
Select the backup you want to use.
Click the name and date of the backup from which you want to restore this Mac.
Click Continue.
It’s at the bottom of the window. Your Mac will begin restoring your Time Machine backup; once the restore finishes, you should be able to access your old Mac’s files and settings on your new Mac.
Tips
- While setting up a Thunderbolt 3 connection is initially a pain, it provides the fastest way to transfer files from one computer to another; you can even transfer files that are several gigabytes in size within a few seconds.
Warnings
- Consider disabling AirDrop when you aren’t using it, and only accept files from people or computers you trust.